Specifications			42-Inch High-Definition Color Display
Model			CMP4121HDU
General	Power supply		AC100-120V / 200 - 240V
	Frequency		50/60Hz
	Power Consumption		380W (StandBy: 2.5 W)
	Dimensions		40.55" (W) x 25.5" (H) x 3.5" (D)
	Weight		68lbs, 3 ozs
Display characteristics	Effective display area		36-5/16" x 20-9/16"
	Aspect ratio		16:9
	Number of pixels		1024 (horizontal) x 1024 (vertical) pixels
	Pixel pitch		0.90 (horizontal) x 0.51 (vertical) mm
	Number of colors (gray levels)		16.7 million colors (256 gray Level)
	Brightness		750 cd/m2 (Typical) at white peak
	Viewing angle		More than 160°
Signal input and terminals	Video	Analog (PC) RGB 1	Format / frequency: R,G, B, H, V/fH: 24k to 106kHz, fV: 50 to 85Hz
			Level/impedance: R,G, B=0.7Vp-p/75Ω
			Synchronization: H/V separate sync.: TTL, H/V composite sync.: TTL, G sync.: 0.3Vp-p
			Connector: mD-Sub 15P x 1
		Analog (PC) RGB 2	Format / frequency: R,G, B, H, V/fH: 24k to 106kHz, fV: 50 to 85Hz
			Level/impedance: R,G, B=0.7Vp-p/75Ω
			Synchronization: H/V separate sync.: TTL, H/V composite sync.: TTL, G sync.: 0.3Vp-p
			Connector: BNC x 5
		Video 1 composite	Format video or S-video (NTSC/PAL/SECAM)
			Level/impedance: 1.0Vp-p/75Ω
			Synchronization: Composite sync. signal
			Connector: BNC x 1, S terminal x 1
		Video 2 component	Format: Y, PB, PR or Y, CB, CR
			Level/impedance:Y=1.0V, Pb/Cb, Pr/Cr=0.7Vp-p/75Ω
			Synchronization: Y signal
			Connector: BNC x 3
	Audio	4 inputs	Stereo signal supplied with 2 video inputs and 2 RGB inputs: L/R 470mV high impedance RCA pin (L/R) x 4
	Control Terminal		Connector: D-sub 9p (compatible with RS-232C)
Signal output		Speaker output	8 W + 8 W (8Ω) JEITA (speakers optional)
		Video  (Video 1)	Connector BNC x 1 (Not compatible with S-video)
Controls	Switches/Buttons		Adjustment button (Input change, Adjustment menu, Selection, Sound Volume adjustment)
	Main adjustment	Video signal	Contrast, brightness, color, color tone, sharpness
		RGB signal	Contrast, brightness, display size, vertical position, horizontal position, clock frequencies, clock phase
	Audio signal		Sound volume, balance, high, low, mute
	Remote control		Infrared remote control provided
	Power management		ON/OFF control/VIA signal detection
Environmental conditions	Temperature		5 ~ 35°C
	Humidity		20-80 % RH (non-condensation)
Regulations	Safety		UL1950, CSA C22.2 No.950 (C-UL), EN 60950
	EMI		FCC class B, EN55022 class B
Supplied accessories			Optional table stand, AC power cable  (L = 5' 11"), interface cable (D-Sub 15P connector; L = 5' 11") infrared remote control unit (2x AA batteries included), user manual